Remove . from dotfiles for convenience

7 files changed, 0 insertions, 2061 deletions

diff --git a/.qutebrowser/bookmarks/urls b/.qutebrowser/bookmarks/urls
deleted file mode 120000
index 801f3d6..0000000
--- a/.qutebrowser/bookmarks/urls
+++ /dev/null
@@ -1 +0,0 @@
-../../.personal/.qutebrowser/bookmarks/urls
\ No newline at end of file
diff --git a/.qutebrowser/keys.conf b/.qutebrowser/keys.conf
deleted file mode 100644
index 76f0e72..0000000
--- a/.qutebrowser/keys.conf
+++ /dev/null
@@ -1,631 +0,0 @@
-# vim: ft=conf
-#
-# In this config file, qutebrowser's key bindings are configured.
-# The format looks like this:
-#
-# [keymode]
-#
-# command
-#   keychain
-#   keychain2
-#   ...
-#
-# All blank lines and lines starting with '#' are ignored.
-# Inline-comments are not permitted.
-#
-# keymode is a comma separated list of modes in which the key binding should be
-# active. If keymode starts with !, the key binding is active in all modes
-# except the listed modes.
-#
-# For special keys (can't be part of a keychain), enclose them in `<`...`>`.
-# For modifiers, you can use either `-` or `+` as delimiters, and these names:
-#
-#  * Control: `Control`, `Ctrl`
-#  * Meta:    `Meta`, `Windows`, `Mod4`
-#  * Alt:     `Alt`, `Mod1`
-#  * Shift:   `Shift`
-#
-# For simple keys (no `<>`-signs), a capital letter means the key is pressed
-# with Shift. For special keys (with `<>`-signs), you need to explicitly add
-# `Shift-` to match a key pressed with shift.  You can bind multiple commands
-# by separating them with `;;`.
-#
-# Note that default keybindings are always bound, and need to be explicitly
-# unbound if you wish to remove them:
-#
-# <unbound>
-#   keychain
-#   keychain2
-#   ...
-
-[!normal]
-
-clear-keychain ;; leave-mode
-    <Escape>
-    <Ctrl-[>
-
-[normal]
-# Keybindings for normal mode.
-
-clear-keychain ;; search
-    <Escape>
-
-set-cmd-text -s :spawn --userscript url-from-surfraw
-    o
-
-set-cmd-text -s :spawn --userscript url-from-surfraw -t
-    t
-
-set-cmd-text :open {url}
-    go
-
-set-cmd-text -s :open -t
-    O
-
-set-cmd-text :open -t {url}
-    gO
-
-set-cmd-text -s :open -b
-    xo
-
-set-cmd-text :open -b {url}
-    xO
-
-set-cmd-text -s :open -w
-    wo
-
-set-cmd-text :open -w {url}
-    wO
-
-open -t
-    ga
-    <Ctrl-T>
-
-tab-close
-    d
-    <Ctrl-W>
-
-tab-close -o
-    D
-
-tab-only
-    co
-
-tab-focus
-    J
-    gt
-
-tab-move
-    gm
-
-tab-move -
-    gl
-
-tab-move +
-    gr
-
-tab-prev
-    K
-    gT
-
-tab-clone
-    gC
-
-reload
-    r
-
-reload -f
-    R
-
-back
-    H
-
-back -t
-    th
-
-back -w
-    wh
-
-forward
-    L
-
-forward -t
-    tl
-
-forward -w
-    wl
-
-fullscreen
-    <F11>
-
-hint
-    f
-
-hint all tab
-    F
-
-hint all window
-    wf
-
-hint all tab-bg
-    ;b
-
-hint all tab-fg
-    ;f
-
-hint all hover
-    ;h
-
-hint images
-    ;i
-
-hint images tab
-    ;I
-
-hint images tab-bg
-    .i
-
-hint links fill ":open {hint-url}"
-    ;o
-
-hint links fill ":open -t {hint-url}"
-    ;O
-
-hint links fill ":open -b {hint-url}"
-    .o
-
-hint links yank
-    ;y
-
-hint links yank-primary
-    ;Y
-
-hint --rapid links tab-bg
-    ;r
-
-hint --rapid links window
-    ;R
-
-hint links download
-    ;d
-
-scroll left
-    h
-
-scroll down
-    j
-
-scroll up
-    k
-
-scroll right
-    l
-
-scroll-perc 0
-    gg
-
-scroll-perc
-    G
-
-search-next
-    n
-
-search-prev
-    N
-
-enter-mode insert
-    i
-
-enter-mode caret
-    v
-
-yank
-    yy
-
-yank -s
-    yY
-
-yank -t
-    yt
-
-yank -ts
-    yT
-
-yank -d
-    yd
-
-yank -ds
-    yD
-
-paste
-    pp
-
-paste -s
-    pP
-
-paste -t
-    Pp
-
-paste -ts
-    PP
-
-paste -w
-    wp
-
-paste -ws
-    wP
-
-quickmark-save
-    m
-
-set-cmd-text -s :quickmark-load -t
-    B
-
-set-cmd-text -s :quickmark-load -w
-    wb
-
-bookmark-add
-    M
-
-spawn --userscript quickmarks-dmenu
-    u
-
-spawn --userscript bookmarks-dmenu
-    b
-
-set-cmd-text -s :bookmark-load -t
-    gB
-
-set-cmd-text -s :bookmark-load -w
-    wB
-
-save
-    sf
-
-set-cmd-text -s :set
-    ss
-
-set-cmd-text -s :set -t
-    sl
-
-set-cmd-text -s :set keybind
-    sk
-
-zoom-out
-    -
-
-zoom-in
-    +
-
-zoom
-    =
-
-navigate prev
-    [[
-
-navigate next
-    ]]
-
-navigate prev -t
-    {{
-
-navigate next -t
-    }}
-
-navigate up
-    gu
-
-navigate up -t
-    gU
-
-navigate increment
-    <Ctrl-A>
-
-navigate decrement
-    <Ctrl-X>
-
-inspector
-    wi
-
-download
-    gd
-
-download-cancel
-    ad
-
-download-clear
-    cd
-
-view-source
-    gf
-
-tab-focus last
-    <Ctrl-Tab>
-
-enter-mode passthrough
-    <Ctrl-V>
-
-quit
-    <Ctrl-Q>
-
-scroll-page 0 1
-    <Ctrl-F>
-
-scroll-page 0 -1
-    <Ctrl-B>
-
-scroll-page 0 0.5
-    <Ctrl-D>
-
-scroll-page 0 -0.5
-    <Ctrl-U>
-
-tab-focus 1
-    <Alt-1>
-
-tab-focus 2
-    <Alt-2>
-
-tab-focus 3
-    <Alt-3>
-
-tab-focus 4
-    <Alt-4>
-
-tab-focus 5
-    <Alt-5>
-
-tab-focus 6
-    <Alt-6>
-
-tab-focus 7
-    <Alt-7>
-
-tab-focus 8
-    <Alt-8>
-
-tab-focus 9
-    <Alt-9>
-
-home
-    <Ctrl-h>
-
-stop
-    <Ctrl-s>
-
-print
-    <Ctrl-Alt-p>
-
-open qute:settings
-    Ss
-
-follow-selected
-    <Return>
-    <Ctrl-M>
-    <Shift-Return>
-    <Enter>
-    <Shift-Enter>
-
-follow-selected -t
-    <Ctrl-Return>
-    <Ctrl-Enter>
-
-set-cmd-text -s :bookmark-load
-    gb
-
-undo
-    <Ctrl-Shift-T>
-
-[insert]
-# Keybindings for insert mode.
-# Since normal keypresses are passed through, only special keys are
-# supported in this mode.
-# Useful hidden commands to map in this section:
-#  * `open-editor`: Open a texteditor with the focused field.
-
-open-editor
-    <Ctrl-E>
-
-[hint]
-# Keybindings for hint mode.
-# Since normal keypresses are passed through, only special keys are
-# supported in this mode.
-# Useful hidden commands to map in this section:
-#  * `follow-hint`: Follow the currently selected hint.
-
-follow-hint
-    <Return>
-    <Ctrl-M>
-    <Shift-Return>
-    <Enter>
-    <Shift-Enter>
-
-hint --rapid links tab-bg
-    <Ctrl-R>
-
-hint links
-    <Ctrl-F>
-
-hint all tab-bg
-    <Ctrl-B>
-
-[command]
-# Keybindings for command mode.
-# Since normal keypresses are passed through, only special keys are
-# supported in this mode.
-# Useful hidden commands to map in this section:
-#  * `command-history-prev`: Switch to previous command in history.
-#  * `command-history-next`: Switch to next command in history.
-#  * `completion-item-prev`: Select previous item in completion.
-#  * `completion-item-next`: Select next item in completion.
-#  * `command-accept`: Execute the command currently in the commandline.
-
-command-history-prev
-    <Ctrl-K>
-    <Up>
-
-command-history-next
-    <Ctrl-J>
-    <Down>
-
-completion-item-prev
-    <Ctrl-P>
-
-completion-item-next
-    <Ctrl-N>
-
-completion-item-del
-    <Ctrl-D>
-
-command-accept
-    <Return>
-    <Ctrl-M>
-    <Shift-Return>
-    <Enter>
-    <Shift-Enter>
-
-[prompt]
-# Keybindings for prompts in the status line.
-# You can bind normal keys in this mode, but they will be only active
-# when a yes/no-prompt is asked. For other prompt modes, you can only
-# bind special keys.
-# Useful hidden commands to map in this section:
-#  * `prompt-accept`: Confirm the entered value.
-#  * `prompt-yes`: Answer yes to a yes/no question.
-#  * `prompt-no`: Answer no to a yes/no question.
-
-prompt-accept
-    <Return>
-    <Ctrl-M>
-    <Shift-Return>
-    <Enter>
-    <Shift-Enter>
-
-prompt-yes
-    y
-
-prompt-no
-    n
-
-[command,prompt]
-
-rl-backward-char
-    <Ctrl-B>
-
-rl-forward-char
-    <Ctrl-F>
-
-rl-backward-word
-    <Alt-B>
-
-rl-forward-word
-    <Alt-F>
-
-rl-beginning-of-line
-    <Ctrl-A>
-
-rl-end-of-line
-    <Ctrl-E>
-
-rl-unix-line-discard
-    <Ctrl-U>
-
-rl-kill-word
-    <Alt-D>
-
-rl-unix-word-rubout
-    <Ctrl-W>
-    <Alt-Backspace>
-
-rl-yank
-    <Ctrl-Y>
-
-rl-delete-char
-    <Ctrl-?>
-
-rl-backward-delete-char
-    <Ctrl-H>
-
-rl-kill-line
-    <Ctrl-K>
-
-[caret]
-
-toggle-selection
-    v
-    <Space>
-
-drop-selection
-    <Ctrl-Space>
-
-enter-mode normal
-    c
-
-move-to-next-line
-    j
-
-move-to-prev-line
-    k
-
-move-to-next-char
-    l
-
-move-to-prev-char
-    h
-
-move-to-end-of-word
-    e
-
-move-to-next-word
-    w
-
-move-to-prev-word
-    b
-
-move-to-start-of-next-block
-    ]
-
-move-to-start-of-prev-block
-    [
-
-move-to-end-of-next-block
-    }
-
-move-to-end-of-prev-block
-    {
-
-move-to-start-of-line
-    0
-
-move-to-end-of-line
-    $
-
-move-to-start-of-document
-    gg
-
-move-to-end-of-document
-    G
-
-yank-selected -p
-    Y
-
-yank-selected
-    y
-    <Return>
-    <Ctrl-M>
-    <Shift-Return>
-    <Enter>
-    <Shift-Enter>
-
-scroll left
-    H
-
-scroll down
-    J
-
-scroll up
-    K
-
-scroll right
-    L
-
diff --git a/.qutebrowser/quickmarks b/.qutebrowser/quickmarks
deleted file mode 120000
index 081ea8d..0000000
--- a/.qutebrowser/quickmarks
+++ /dev/null
@@ -1 +0,0 @@
-../.personal/.qutebrowser/quickmarks
\ No newline at end of file
diff --git a/.qutebrowser/qutebrowser.conf b/.qutebrowser/qutebrowser.conf
deleted file mode 100644
index 606c81d..0000000
--- a/.qutebrowser/qutebrowser.conf
+++ /dev/null
@@ -1,1394 +0,0 @@
-# vim: ft=dosini
-
-# Configfile for qutebrowser.
-#
-# This configfile is parsed by python's configparser in extended
-# interpolation mode. The format is very INI-like, so there are
-# categories like [general] with "key = value"-pairs.
-#
-# Note that you shouldn't add your own comments, as this file is
-# regenerated every time the config is saved.
-#
-# Interpolation looks like  ${value}  or  ${section:value} and will be
-# replaced by the respective value.
-#
-# Some settings will expand environment variables. Note that, since
-# interpolation is run first, you will need to escape the  $  char as
-# described below.
-#
-# This is the default config, so if you want to remove anything from
-# here (as opposed to change/add), for example a key binding, set it to
-# an empty value.
-#
-# You will need to escape the following values:
-#   - # at the start of the line (at the first position of the key) (\#)
-#   - $ in a value ($$)
-
-[general]
-# General/miscellaneous options.
-#
-# ignore-case (IgnoreCase):
-#     Whether to find text on a page case-insensitively.
-#         true: Search case-insensitively
-#         false: Search case-sensitively
-#         smart: Search case-sensitively if there are capital chars
-#     Default: smart
-#
-# wrap-search (Bool):
-#     Whether to wrap finding text to the top when arriving at the end.
-#     Valid values: true, false
-#     Default: true
-#
-# startpage (List):
-#     The default page(s) to open at the start, separated by commas.
-#     Default: https://duckduckgo.com
-#
-# default-page (FuzzyUrl):
-#     The page to open if :open -t/-b/-w is used without URL. Use
-#     `about:blank` for a blank page.
-#     Default: ${startpage}
-#
-# auto-search (AutoSearch):
-#     Whether to start a search when something else than a URL is
-#     entered.
-#         naive: Use simple/naive check.
-#         dns: Use DNS requests (might be slow!).
-#         false: Never search automatically.
-#     Default: naive
-#
-# auto-save-config (Bool):
-#     Whether to save the config automatically on quit.
-#     Valid values: true, false
-#     Default: true
-#
-# auto-save-interval (Int):
-#     How often (in milliseconds) to auto-save config/cookies/etc.
-#     Default: 15000
-#
-# editor (ShellCommand):
-#     The editor (and arguments) to use for the `open-editor` command.
-#     The arguments get split like in a shell, so you can use `"` or `'`
-#     to quote them.
-#     `{}` gets replaced by the filename of the file to be edited.
-#     Default: gvim -f "{}"
-#
-# editor-encoding (Encoding):
-#     Encoding to use for editor.
-#     Default: utf-8
-#
-# private-browsing (Bool):
-#     Do not record visited pages in the history or store web page
-#     icons.
-#     Valid values: true, false
-#     Default: false
-#
-# developer-extras (Bool):
-#     Enable extra tools for Web developers.
-#     This needs to be enabled for `:inspector` to work and also adds an
-#     _Inspect_ entry to the context menu.
-#     Valid values: true, false
-#     Default: false
-#
-# print-element-backgrounds (Bool):
-#     Whether the background color and images are also drawn when the
-#     page is printed.
-#     Valid values: true, false
-#     Default: true
-#
-# xss-auditing (Bool):
-#     Whether load requests should be monitored for cross-site scripting
-#     attempts.
-#     Suspicious scripts will be blocked and reported in the inspector's
-#     JavaScript console. Enabling this feature might have an impact on
-#     performance.
-#     Valid values: true, false
-#     Default: false
-#
-# site-specific-quirks (Bool):
-#     Enable workarounds for broken sites.
-#     Valid values: true, false
-#     Default: true
-#
-# default-encoding (String):
-#     Default encoding to use for websites.
-#     The encoding must be a string describing an encoding such as
-#     _utf-8_, _iso-8859-1_, etc. If left empty a default value will be
-#     used.
-#     Default:
-#
-# new-instance-open-target (String):
-#     How to open links in an existing instance if a new one is
-#     launched.
-#         tab: Open a new tab in the existing window and activate the
-#     window.
-#         tab-bg: Open a new background tab in the existing window and
-#     activate the window.
-#         tab-silent: Open a new tab in the existing window without
-#     activating the window.
-#         tab-bg-silent: Open a new background tab in the existing
-#     window without activating the window.
-#         window: Open in a new window.
-#     Default: tab
-#
-# log-javascript-console (String):
-#     How to log javascript console messages.
-#         none: Don't log messages.
-#         debug: Log messages with debug level.
-#         info: Log messages with info level.
-#     Default: debug
-#
-# save-session (Bool):
-#     Whether to always save the open pages.
-#     Valid values: true, false
-#     Default: false
-#
-# session-default-name (SessionName):
-#     The name of the session to save by default, or empty for the last
-#     loaded session.
-#     Default:
-#
-# url-incdec-segments (FlagList):
-#     The URL segments where `:navigate increment/decrement` will search
-#     for a number.
-#     Valid values: host, path, query, anchor
-#     Default: path,query
-ignore-case = smart
-wrap-search = true
-startpage = about:blank
-default-page = https://startpage.com
-auto-search = naive
-auto-save-config = true
-auto-save-interval = 15000
-editor = urxvt -e vim -f "{}"
-editor-encoding = utf-8
-private-browsing = false
-developer-extras = false
-print-element-backgrounds = true
-xss-auditing = false
-site-specific-quirks = true
-default-encoding = 
-new-instance-open-target = tab
-log-javascript-console = debug
-save-session = false
-session-default-name = 
-url-incdec-segments = path,query
-
-[ui]
-# General options related to the user interface.
-#
-# zoom-levels (PercList):
-#     The available zoom levels, separated by commas.
-#     Default:
-#     25%,33%,50%,67%,75%,90%,100%,110%,125%,150%,175%,200%,250%,300%,400%,500%
-#
-# default-zoom (Perc):
-#     The default zoom level.
-#     Default: 100%
-#
-# downloads-position (VerticalPosition):
-#     Where to show the downloaded files.
-#     Valid values: top, bottom
-#     Default: top
-#
-# message-timeout (Int):
-#     Time (in ms) to show messages in the statusbar for.
-#     Default: 2000
-#
-# message-unfocused (Bool):
-#     Whether to show messages in unfocused windows.
-#     Valid values: true, false
-#     Default: false
-#
-# confirm-quit (ConfirmQuit):
-#     Whether to confirm quitting the application.
-#         always: Always show a confirmation.
-#         multiple-tabs: Show a confirmation if multiple tabs are
-#     opened.
-#         downloads: Show a confirmation if downloads are running
-#         never: Never show a confirmation.
-#     Default: never
-#
-# display-statusbar-messages (Bool):
-#     Whether to display javascript statusbar messages.
-#     Valid values: true, false
-#     Default: false
-#
-# zoom-text-only (Bool):
-#     Whether the zoom factor on a frame applies only to the text or to
-#     all content.
-#     Valid values: true, false
-#     Default: false
-#
-# frame-flattening (Bool):
-#     Whether to  expand each subframe to its contents.
-#     This will flatten all the frames to become one scrollable page.
-#     Valid values: true, false
-#     Default: false
-#
-# user-stylesheet (UserStyleSheet):
-#     User stylesheet to use (absolute filename, filename relative to
-#     the config directory or CSS string). Will expand environment
-#     variables.
-#     Default: ::-webkit-scrollbar { width: 0px; height: 0px; }
-#
-# css-media-type (String):
-#     Set the CSS media type.
-#     Default:
-#
-# smooth-scrolling (Bool):
-#     Whether to enable smooth scrolling for webpages.
-#     Valid values: true, false
-#     Default: false
-#
-# remove-finished-downloads (Int):
-#     Number of milliseconds to wait before removing finished downloads.
-#     Will not be removed if value is -1.
-#     Default: -1
-#
-# hide-statusbar (Bool):
-#     Whether to hide the statusbar unless a message is shown.
-#     Valid values: true, false
-#     Default: false
-#
-# statusbar-padding (Padding):
-#     Padding for statusbar (top, bottom, left, right).
-#     Default: 1,1,0,0
-#
-# window-title-format (FormatString):
-#     The format to use for the window title. The following placeholders
-#     are defined:
-#     * `{perc}`: The percentage as a string like `[10%]`.
-#     * `{perc_raw}`: The raw percentage, e.g. `10`
-#     * `{title}`: The title of the current web page
-#     * `{title_sep}`: The string ` - ` if a title is set, empty
-#     otherwise.
-#     * `{id}`: The internal window ID of this window.
-#     * `{scroll_pos}`: The page scroll position.
-#     Default: {perc}{title}{title_sep}qutebrowser
-#
-# hide-mouse-cursor (Bool):
-#     Whether to hide the mouse cursor.
-#     Valid values: true, false
-#     Default: false
-#
-# modal-js-dialog (Bool):
-#     Use standard JavaScript modal dialog for alert() and confirm()
-#     Valid values: true, false
-#     Default: false
-#
-# hide-wayland-decoration (Bool):
-#     Hide the window decoration when using wayland (requires restart)
-#     Valid values: true, false
-#     Default: false
-zoom-levels = 25%,33%,50%,67%,75%,90%,100%,110%,125%,150%,175%,200%,250%,300%,400%,500%
-default-zoom = 100%
-downloads-position = top
-message-timeout = 2000
-message-unfocused = false
-confirm-quit = never
-display-statusbar-messages = false
-zoom-text-only = false
-frame-flattening = false
-user-stylesheet = ::-webkit-scrollbar { width: 0px; height: 0px; }
-css-media-type = 
-smooth-scrolling = false
-remove-finished-downloads = -1
-hide-statusbar = false
-statusbar-padding = 1,1,0,0
-window-title-format = {perc}{title}{title_sep}qutebrowser
-hide-mouse-cursor = false
-modal-js-dialog = false
-hide-wayland-decoration = false
-
-[network]
-# Settings related to the network.
-#
-# do-not-track (Bool):
-#     Value to send in the `DNT` header.
-#     Valid values: true, false
-#     Default: true
-#
-# accept-language (String):
-#     Value to send in the `accept-language` header.
-#     Default: en-US,en
-#
-# referer-header (String):
-#     Send the Referer header
-#         always: Always send.
-#         never: Never send; this is not recommended, as some sites may
-#     break.
-#         same-domain: Only send for the same domain. This will still
-#     protect your privacy, but shouldn't break any sites.
-#     Default: same-domain
-#
-# user-agent (UserAgent):
-#     User agent to send. Empty to send the default.
-#     Default:
-#
-# proxy (Proxy):
-#     The proxy to use.
-#     In addition to the listed values, you can use a `socks://...` or
-#     `http://...` URL.
-#         system: Use the system wide proxy.
-#         none: Don't use any proxy
-#     Default: system
-#
-# proxy-dns-requests (Bool):
-#     Whether to send DNS requests over the configured proxy.
-#     Valid values: true, false
-#     Default: true
-#
-# ssl-strict (BoolAsk):
-#     Whether to validate SSL handshakes.
-#     Valid values: true, false, ask
-#     Default: ask
-#
-# dns-prefetch (Bool):
-#     Whether to try to pre-fetch DNS entries to speed up browsing.
-#     Valid values: true, false
-#     Default: true
-do-not-track = true
-accept-language = en-US,en
-referer-header = same-domain
-user-agent = 
-proxy = system
-proxy-dns-requests = true
-ssl-strict = ask
-dns-prefetch = true
-
-[completion]
-# Options related to completion and command history.
-#
-# auto-open (Bool):
-#     Automatically open completion when typing.
-#     Valid values: true, false
-#     Default: true
-#
-# download-path-suggestion (String):
-#     What to display in the download filename input.
-#         path: Show only the download path.
-#         filename: Show only download filename.
-#         both: Show download path and filename.
-#     Default: path
-#
-# timestamp-format (TimestampTemplate):
-#     How to format timestamps (e.g. for history)
-#     Default: %Y-%m-%d
-#
-# show (Bool):
-#     Whether to show the autocompletion window.
-#     Valid values: true, false
-#     Default: true
-#
-# height (PercOrInt):
-#     The height of the completion, in px or as percentage of the
-#     window.
-#     Default: 50%
-#
-# cmd-history-max-items (Int):
-#     How many commands to save in the command history.
-#     0: no history / -1: unlimited
-#     Default: 100
-#
-# web-history-max-items (Int):
-#     How many URLs to show in the web history.
-#     0: no history / -1: unlimited
-#     Default: 1000
-#
-# quick-complete (Bool):
-#     Whether to move on to the next part when there's only one possible
-#     completion left.
-#     Valid values: true, false
-#     Default: true
-#
-# shrink (Bool):
-#     Whether to shrink the completion to be smaller than the configured
-#     size if there are no scrollbars.
-#     Valid values: true, false
-#     Default: false
-#
-# scrollbar-width (Int):
-#     Width of the scrollbar in the completion window (in px).
-#     Default: 12
-#
-# scrollbar-padding (Int):
-#     Padding of scrollbar handle in completion window (in px).
-#     Default: 2
-auto-open = true
-download-path-suggestion = path
-timestamp-format = %Y-%m-%d
-show = true
-height = 50%
-cmd-history-max-items = 100
-web-history-max-items = 1000
-quick-complete = true
-shrink = false
-scrollbar-width = 12
-scrollbar-padding = 2
-
-[input]
-# Options related to input modes.
-#
-# timeout (Int):
-#     Timeout for ambiguous key bindings.
-#     Default: 500
-#
-# partial-timeout (Int):
-#     Timeout for partially typed key bindings.
-#     Default: 1000
-#
-# insert-mode-on-plugins (Bool):
-#     Whether to switch to insert mode when clicking flash and other
-#     plugins.
-#     Valid values: true, false
-#     Default: false
-#
-# auto-leave-insert-mode (Bool):
-#     Whether to leave insert mode if a non-editable element is clicked.
-#     Valid values: true, false
-#     Default: true
-#
-# auto-insert-mode (Bool):
-#     Whether to automatically enter insert mode if an editable element
-#     is focused after page load.
-#     Valid values: true, false
-#     Default: false
-#
-# forward-unbound-keys (String):
-#     Whether to forward unbound keys to the webview in normal mode.
-#         all: Forward all unbound keys.
-#         auto: Forward unbound non-alphanumeric keys.
-#         none: Don't forward any keys.
-#     Default: auto
-#
-# spatial-navigation (Bool):
-#     Enables or disables the Spatial Navigation feature.
-#     Spatial navigation consists in the ability to navigate between
-#     focusable elements in a Web page, such as hyperlinks and form
-#     controls, by using Left, Right, Up and Down arrow keys. For
-#     example, if a user presses the Right key, heuristics determine
-#     whether there is an element he might be trying to reach towards
-#     the right and which element he probably wants.
-#     Valid values: true, false
-#     Default: false
-#
-# links-included-in-focus-chain (Bool):
-#     Whether hyperlinks should be included in the keyboard focus chain.
-#     Valid values: true, false
-#     Default: true
-#
-# rocker-gestures (Bool):
-#     Whether to enable Opera-like mouse rocker gestures. This disables
-#     the context menu.
-#     Valid values: true, false
-#     Default: false
-#
-# mouse-zoom-divider (Int):
-#     How much to divide the mouse wheel movements to translate them
-#     into zoom increments.
-#     Default: 512
-timeout = 500
-partial-timeout = 1000
-insert-mode-on-plugins = false
-auto-leave-insert-mode = true
-auto-insert-mode = false
-forward-unbound-keys = auto
-spatial-navigation = false
-links-included-in-focus-chain = true
-rocker-gestures = false
-mouse-zoom-divider = 512
-
-[tabs]
-# Configuration of the tab bar.
-#
-# background-tabs (Bool):
-#     Whether to open new tabs (middleclick/ctrl+click) in background.
-#     Valid values: true, false
-#     Default: false
-#
-# select-on-remove (SelectOnRemove):
-#     Which tab to select when the focused tab is removed.
-#         left: Select the tab on the left.
-#         right: Select the tab on the right.
-#         previous: Select the previously selected tab.
-#     Default: right
-#
-# new-tab-position (NewTabPosition):
-#     How new tabs are positioned.
-#         left: On the left of the current tab.
-#         right: On the right of the current tab.
-#         first: At the left end.
-#         last: At the right end.
-#     Default: right
-#
-# new-tab-position-explicit (NewTabPosition):
-#     How new tabs opened explicitly are positioned.
-#         left: On the left of the current tab.
-#         right: On the right of the current tab.
-#         first: At the left end.
-#         last: At the right end.
-#     Default: last
-#
-# last-close (String):
-#     Behavior when the last tab is closed.
-#         ignore: Don't do anything.
-#         blank: Load a blank page.
-#         startpage: Load the start page.
-#         default-page: Load the default page.
-#         close: Close the window.
-#     Default: ignore
-#
-# show (String):
-#     When to show the tab bar
-#         always: Always show the tab bar.
-#         never: Always hide the tab bar.
-#         multiple: Hide the tab bar if only one tab is open.
-#         switching: Show the tab bar when switching tabs.
-#     Default: always
-#
-# show-switching-delay (Int):
-#     Time to show the tab bar before hiding it when tabs->show is set
-#     to 'switching'.
-#     Default: 800
-#
-# wrap (Bool):
-#     Whether to wrap when changing tabs.
-#     Valid values: true, false
-#     Default: true
-#
-# movable (Bool):
-#     Whether tabs should be movable.
-#     Valid values: true, false
-#     Default: true
-#
-# close-mouse-button (String):
-#     On which mouse button to close tabs.
-#         right: Close tabs on right-click.
-#         middle: Close tabs on middle-click.
-#         none: Don't close tabs using the mouse.
-#     Default: middle
-#
-# position (Position):
-#     The position of the tab bar.
-#     Valid values: top, bottom, left, right
-#     Default: top
-#
-# show-favicons (Bool):
-#     Whether to show favicons in the tab bar.
-#     Valid values: true, false
-#     Default: true
-#
-# width (PercOrInt):
-#     The width of the tab bar if it's vertical, in px or as percentage
-#     of the window.
-#     Default: 20%
-#
-# indicator-width (Int):
-#     Width of the progress indicator (0 to disable).
-#     Default: 3
-#
-# tabs-are-windows (Bool):
-#     Whether to open windows instead of tabs.
-#     Valid values: true, false
-#     Default: false
-#
-# title-format (FormatString):
-#     The format to use for the tab title. The following placeholders
-#     are defined:
-#     * `{perc}`: The percentage as a string like `[10%]`.
-#     * `{perc_raw}`: The raw percentage, e.g. `10`
-#     * `{title}`: The title of the current web page
-#     * `{title_sep}`: The string ` - ` if a title is set, empty
-#     otherwise.
-#     * `{index}`: The index of this tab.
-#     * `{id}`: The internal tab ID of this tab.
-#     * `{scroll_pos}`: The page scroll position.
-#     Default: {index}: {title}
-#
-# title-alignment (TextAlignment):
-#     Alignment of the text inside of tabs
-#     Valid values: left, right, center
-#     Default: left
-#
-# mousewheel-tab-switching (Bool):
-#     Switch between tabs using the mouse wheel.
-#     Valid values: true, false
-#     Default: true
-#
-# padding (Padding):
-#     Padding for tabs (top, bottom, left, right).
-#     Default: 0,0,5,5
-#
-# indicator-padding (Padding):
-#     Padding for indicators (top, bottom, left, right).
-#     Default: 2,2,0,4
-background-tabs = false
-select-on-remove = right
-new-tab-position = right
-new-tab-position-explicit = last
-last-close = ignore
-show = multiple
-show-switching-delay = 800
-wrap = true
-movable = true
-close-mouse-button = middle
-position = top
-show-favicons = false
-width = 20%
-indicator-width = 3
-tabs-are-windows = true
-title-format = {index}: {title}
-title-alignment = left
-mousewheel-tab-switching = true
-padding = 0,0,5,5
-indicator-padding = 2,2,0,4
-
-[storage]
-# Settings related to cache and storage.
-#
-# download-directory (Directory):
-#     The directory to save downloads to. An empty value selects a
-#     sensible os-specific default. Will expand environment variables.
-#     Default:
-#
-# prompt-download-directory (Bool):
-#     Whether to prompt the user for the download location.
-#     If set to false, 'download-directory' will be used.
-#     Valid values: true, false
-#     Default: true
-#
-# remember-download-directory (Bool):
-#     Whether to remember the last used download directory.
-#     Valid values: true, false
-#     Default: true
-#
-# maximum-pages-in-cache (Int):
-#     The maximum number of pages to hold in the global memory page
-#     cache.
-#     The Page Cache allows for a nicer user experience when navigating
-#     forth or back to pages in the forward/back history, by pausing and
-#     resuming up to _n_ pages.
-#     For more information about the feature, please refer to:
-#     http://webkit.org/blog/427/webkit-page-cache-i-the-basics/
-#     Default:
-#
-# object-cache-capacities (WebKitBytesList):
-#     The capacities for the global memory cache for dead objects such
-#     as stylesheets or scripts. Syntax: cacheMinDeadCapacity,
-#     cacheMaxDead, totalCapacity.
-#     The _cacheMinDeadCapacity_ specifies the minimum number of bytes
-#     that dead objects should consume when the cache is under pressure.
-#     _cacheMaxDead_ is the maximum number of bytes that dead objects
-#     should consume when the cache is *not* under pressure.
-#     _totalCapacity_ specifies the maximum number of bytes that the
-#     cache should consume *overall*.
-#     Default:
-#
-# offline-storage-default-quota (WebKitBytes):
-#     Default quota for new offline storage databases.
-#     Default:
-#
-# offline-web-application-cache-quota (WebKitBytes):
-#     Quota for the offline web application cache.
-#     Default:
-#
-# offline-storage-database (Bool):
-#     Whether support for the HTML 5 offline storage feature is enabled.
-#     Valid values: true, false
-#     Default: true
-#
-# offline-web-application-storage (Bool):
-#     Whether support for the HTML 5 web application cache feature is
-#     enabled.
-#     An application cache acts like an HTTP cache in some sense. For
-#     documents that use the application cache via JavaScript, the
-#     loader engine will first ask the application cache for the
-#     contents, before hitting the network.
-#     The feature is described in details at:
-#     http://dev.w3.org/html5/spec/Overview.html#appcache
-#     Valid values: true, false
-#     Default: true
-#
-# local-storage (Bool):
-#     Whether support for the HTML 5 local storage feature is enabled.
-#     Valid values: true, false
-#     Default: true
-#
-# cache-size (Int):
-#     Size of the HTTP network cache.
-#     Default: 52428800
-download-directory = 
-prompt-download-directory = true
-remember-download-directory = true
-maximum-pages-in-cache = 
-object-cache-capacities = 
-offline-storage-default-quota = 
-offline-web-application-cache-quota = 
-offline-storage-database = true
-offline-web-application-storage = true
-local-storage = true
-cache-size = 52428800
-
-[content]
-# Loaded plugins/scripts and allowed actions.
-#
-# allow-images (Bool):
-#     Whether images are automatically loaded in web pages.
-#     Valid values: true, false
-#     Default: true
-#
-# allow-javascript (Bool):
-#     Enables or disables the running of JavaScript programs.
-#     Valid values: true, false
-#     Default: true
-#
-# allow-plugins (Bool):
-#     Enables or disables plugins in Web pages.
-#     Qt plugins with a mimetype such as "application/x-qt-plugin" are
-#     not affected by this setting.
-#     Valid values: true, false
-#     Default: false
-#
-# webgl (Bool):
-#     Enables or disables WebGL.
-#     Valid values: true, false
-#     Default: true
-#
-# css-regions (Bool):
-#     Enable or disable support for CSS regions.
-#     Valid values: true, false
-#     Default: true
-#
-# hyperlink-auditing (Bool):
-#     Enable or disable hyperlink auditing (<a ping>).
-#     Valid values: true, false
-#     Default: false
-#
-# geolocation (BoolAsk):
-#     Allow websites to request geolocations.
-#     Valid values: true, false, ask
-#     Default: ask
-#
-# notifications (BoolAsk):
-#     Allow websites to show notifications.
-#     Valid values: true, false, ask
-#     Default: ask
-#
-# javascript-can-open-windows (Bool):
-#     Whether JavaScript programs can open new windows.
-#     Valid values: true, false
-#     Default: false
-#
-# javascript-can-close-windows (Bool):
-#     Whether JavaScript programs can close windows.
-#     Valid values: true, false
-#     Default: false
-#
-# javascript-can-access-clipboard (Bool):
-#     Whether JavaScript programs can read or write to the clipboard.
-#     Valid values: true, false
-#     Default: false
-#
-# ignore-javascript-prompt (Bool):
-#     Whether all javascript prompts should be ignored.
-#     Valid values: true, false
-#     Default: false
-#
-# ignore-javascript-alert (Bool):
-#     Whether all javascript alerts should be ignored.
-#     Valid values: true, false
-#     Default: false
-#
-# local-content-can-access-remote-urls (Bool):
-#     Whether locally loaded documents are allowed to access remote
-#     urls.
-#     Valid values: true, false
-#     Default: false
-#
-# local-content-can-access-file-urls (Bool):
-#     Whether locally loaded documents are allowed to access other local
-#     urls.
-#     Valid values: true, false
-#     Default: true
-#
-# cookies-accept (String):
-#     Control which cookies to accept.
-#         all: Accept all cookies.
-#         no-3rdparty: Accept cookies from the same origin only.
-#         no-unknown-3rdparty: Accept cookies from the same origin only,
-#     unless a cookie is already set for the domain.
-#         never: Don't accept cookies at all.
-#     Default: no-3rdparty
-#
-# cookies-store (Bool):
-#     Whether to store cookies.
-#     Valid values: true, false
-#     Default: true
-#
-# host-block-lists (UrlList):
-#     List of URLs of lists which contain hosts to block.
-#     The file can be in one of the following formats:
-#     - An '/etc/hosts'-like file
-#     - One host per line
-#     - A zip-file of any of the above, with either only one file, or a
-#     file named 'hosts' (with any extension).
-#     Default:
-#     http://www.malwaredomainlist.com/hostslist/hosts.txt,http://someonewhocares.org/hosts/hosts,http://winhelp2002.mvps.org/hosts.zip,http://malwaredomains.lehigh.edu/files/justdomains.zip,http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
-#
-# host-blocking-enabled (Bool):
-#     Whether host blocking is enabled.
-#     Valid values: true, false
-#     Default: true
-#
-# host-blocking-whitelist (List):
-#     List of domains that should always be loaded, despite being
-#     ad-blocked.
-#     Domains may contain * and ? wildcards and are otherwise required
-#     to exactly match the requested domain.
-#     Local domains are always exempt from hostblocking.
-#     Default: piwik.org
-#
-# enable-pdfjs (Bool):
-#     Enable pdf.js to view PDF files in the browser.
-#     Note that the files can still be downloaded by clicking the
-#     download button in the pdf.js viewer.
-#     Valid values: true, false
-#     Default: false
-allow-images = true
-allow-javascript = true
-allow-plugins = false
-webgl = true
-css-regions = true
-hyperlink-auditing = false
-geolocation = ask
-notifications = ask
-javascript-can-open-windows = false
-javascript-can-close-windows = false
-javascript-can-access-clipboard = false
-ignore-javascript-prompt = false
-ignore-javascript-alert = false
-local-content-can-access-remote-urls = false
-local-content-can-access-file-urls = true
-cookies-accept = no-3rdparty
-cookies-store = true
-host-block-lists = http://www.malwaredomainlist.com/hostslist/hosts.txt,http://someonewhocares.org/hosts/hosts,http://winhelp2002.mvps.org/hosts.zip,http://malwaredomains.lehigh.edu/files/justdomains.zip,http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
-host-blocking-enabled = true
-host-blocking-whitelist = piwik.org
-enable-pdfjs = false
-
-[hints]
-# Hinting settings.
-#
-# border (String):
-#     CSS border value for hints.
-#     Default: 1px solid #E3BE23
-#
-# opacity (Float):
-#     Opacity for hints.
-#     Default: 0.7
-#
-# mode (String):
-#     Mode to use for hints.
-#         number: Use numeric hints.
-#         letter: Use the chars in the hints -> chars setting.
-#     Default: letter
-#
-# chars (String):
-#     Chars used for hint strings.
-#     Default: asdfghjkl
-#
-# min-chars (Int):
-#     Minimum number of chars used for hint strings.
-#     Default: 1
-#
-# scatter (Bool):
-#     Whether to scatter hint key chains (like Vimium) or not (like
-#     dwb).
-#     Valid values: true, false
-#     Default: true
-#
-# uppercase (Bool):
-#     Make chars in hint strings uppercase.
-#     Valid values: true, false
-#     Default: false
-#
-# auto-follow (Bool):
-#     Whether to auto-follow a hint if there's only one left.
-#     Valid values: true, false
-#     Default: true
-#
-# next-regexes (RegexList):
-#     A comma-separated list of regexes to use for 'next' links.
-#     Default:
-#     \bnext\b,\bmore\b,\bnewer\b,\b[>→≫]\b,\b(>>|»)\b,\bcontinue\b
-#
-# prev-regexes (RegexList):
-#     A comma-separated list of regexes to use for 'prev' links.
-#     Default: \bprev(ious)?\b,\bback\b,\bolder\b,\b[<←≪]\b,\b(<<|«)\b
-border = 1px solid #E3BE23
-opacity = 1
-mode = letter
-chars = aoeuidhtns
-min-chars = 1
-scatter = true
-uppercase = true
-auto-follow = true
-next-regexes = \bnext\b,\bmore\b,\bnewer\b,\b[>→≫]\b,\b(>>|»)\b,\bcontinue\b
-prev-regexes = \bprev(ious)?\b,\bback\b,\bolder\b,\b[<←≪]\b,\b(<<|«)\b
-
-[searchengines]
-# Definitions of search engines which can be used via the address bar.
-# The searchengine named `DEFAULT` is used when `general -> auto-search`
-# is true and something else than a URL was entered to be opened. Other
-# search engines can be used by prepending the search engine name to the
-# search term, e.g. `:open google qutebrowser`. The string `{}` will be
-# replaced by the search term, use `{{` and `}}` for literal `{`/`}`
-# signs.
-DEFAULT = https://duckduckgo.com/?q={}
-
-[aliases]
-# Aliases for commands.
-# By default, no aliases are defined. Example which adds a new command
-# `:qtb` to open qutebrowsers website:
-# `qtb = open http://www.qutebrowser.org/`
-
-[colors]
-# Colors used in the UI.
-# A value can be in one of the following format:
-#  * `#RGB`/`#RRGGBB`/`#RRRGGGBBB`/`#RRRRGGGGBBBB`
-#  * A SVG color name as specified in http://www.w3.org/TR/SVG/types.html#ColorKeywords[the W3C specification].
-#  * transparent (no color)
-#  * `rgb(r, g, b)` / `rgba(r, g, b, a)` (values 0-255 or percentages)
-#  * `hsv(h, s, v)` / `hsva(h, s, v, a)` (values 0-255, hue 0-359)
-#  * A gradient as explained in http://doc.qt.io/qt-5/stylesheet-reference.html#list-of-property-types[the Qt documentation] under ``Gradient''.
-# A *.system value determines the color system to use for color
-# interpolation between similarly-named *.start and *.stop entries,
-# regardless of how they are defined in the options. Valid values are
-# 'rgb', 'hsv', and 'hsl'.
-# The `hints.*` values are a special case as they're real CSS colors, not Qt-CSS colors. There, for a gradient, you need to use `-webkit-gradient`, see https://www.webkit.org/blog/175/introducing-css-gradients/[the WebKit documentation].
-#
-# completion.fg (QtColor):
-#     Text color of the completion widget.
-#     Default: white
-#
-# completion.bg (QssColor):
-#     Background color of the completion widget.
-#     Default: #333333
-#
-# completion.alternate-bg (QssColor):
-#     Alternating background color of the completion widget.
-#     Default: #444444
-#
-# completion.category.fg (QtColor):
-#     Foreground color of completion widget category headers.
-#     Default: white
-#
-# completion.category.bg (QssColor):
-#     Background color of the completion widget category headers.
-#     Default: qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 #888888,
-#     stop:1 #505050)
-#
-# completion.category.border.top (QssColor):
-#     Top border color of the completion widget category headers.
-#     Default: black
-#
-# completion.category.border.bottom (QssColor):
-#     Bottom border color of the completion widget category headers.
-#     Default: ${completion.category.border.top}
-#
-# completion.item.selected.fg (QtColor):
-#     Foreground color of the selected completion item.
-#     Default: black
-#
-# completion.item.selected.bg (QssColor):
-#     Background color of the selected completion item.
-#     Default: #e8c000
-#
-# completion.item.selected.border.top (QssColor):
-#     Top border color of the completion widget category headers.
-#     Default: #bbbb00
-#
-# completion.item.selected.border.bottom (QssColor):
-#     Bottom border color of the selected completion item.
-#     Default: ${completion.item.selected.border.top}
-#
-# completion.match.fg (QssColor):
-#     Foreground color of the matched text in the completion.
-#     Default: #ff4444
-#
-# completion.scrollbar.fg (QssColor):
-#     Color of the scrollbar handle in completion view.
-#     Default: ${completion.fg}
-#
-# completion.scrollbar.bg (QssColor):
-#     Color of the scrollbar in completion view
-#     Default: ${completion.bg}
-#
-# statusbar.fg (QssColor):
-#     Foreground color of the statusbar.
-#     Default: white
-#
-# statusbar.bg (QssColor):
-#     Background color of the statusbar.
-#     Default: black
-#
-# statusbar.fg.error (QssColor):
-#     Foreground color of the statusbar if there was an error.
-#     Default: ${statusbar.fg}
-#
-# statusbar.bg.error (QssColor):
-#     Background color of the statusbar if there was an error.
-#     Default: red
-#
-# statusbar.fg.warning (QssColor):
-#     Foreground color of the statusbar if there is a warning.
-#     Default: ${statusbar.fg}
-#
-# statusbar.bg.warning (QssColor):
-#     Background color of the statusbar if there is a warning.
-#     Default: darkorange
-#
-# statusbar.fg.prompt (QssColor):
-#     Foreground color of the statusbar if there is a prompt.
-#     Default: ${statusbar.fg}
-#
-# statusbar.bg.prompt (QssColor):
-#     Background color of the statusbar if there is a prompt.
-#     Default: darkblue
-#
-# statusbar.fg.insert (QssColor):
-#     Foreground color of the statusbar in insert mode.
-#     Default: ${statusbar.fg}
-#
-# statusbar.bg.insert (QssColor):
-#     Background color of the statusbar in insert mode.
-#     Default: darkgreen
-#
-# statusbar.fg.command (QssColor):
-#     Foreground color of the statusbar in command mode.
-#     Default: ${statusbar.fg}
-#
-# statusbar.bg.command (QssColor):
-#     Background color of the statusbar in command mode.
-#     Default: ${statusbar.bg}
-#
-# statusbar.fg.caret (QssColor):
-#     Foreground color of the statusbar in caret mode.
-#     Default: ${statusbar.fg}
-#
-# statusbar.bg.caret (QssColor):
-#     Background color of the statusbar in caret mode.
-#     Default: purple
-#
-# statusbar.fg.caret-selection (QssColor):
-#     Foreground color of the statusbar in caret mode with a selection
-#     Default: ${statusbar.fg}
-#
-# statusbar.bg.caret-selection (QssColor):
-#     Background color of the statusbar in caret mode with a selection
-#     Default: #a12dff
-#
-# statusbar.progress.bg (QssColor):
-#     Background color of the progress bar.
-#     Default: white
-#
-# statusbar.url.fg (QssColor):
-#     Default foreground color of the URL in the statusbar.
-#     Default: ${statusbar.fg}
-#
-# statusbar.url.fg.success (QssColor):
-#     Foreground color of the URL in the statusbar on successful load
-#     (http).
-#     Default: white
-#
-# statusbar.url.fg.success.https (QssColor):
-#     Foreground color of the URL in the statusbar on successful load
-#     (https).
-#     Default: lime
-#
-# statusbar.url.fg.error (QssColor):
-#     Foreground color of the URL in the statusbar on error.
-#     Default: orange
-#
-# statusbar.url.fg.warn (QssColor):
-#     Foreground color of the URL in the statusbar when there's a
-#     warning.
-#     Default: yellow
-#
-# statusbar.url.fg.hover (QssColor):
-#     Foreground color of the URL in the statusbar for hovered links.
-#     Default: aqua
-#
-# tabs.fg.odd (QtColor):
-#     Foreground color of unselected odd tabs.
-#     Default: white
-#
-# tabs.bg.odd (QtColor):
-#     Background color of unselected odd tabs.
-#     Default: grey
-#
-# tabs.fg.even (QtColor):
-#     Foreground color of unselected even tabs.
-#     Default: white
-#
-# tabs.bg.even (QtColor):
-#     Background color of unselected even tabs.
-#     Default: darkgrey
-#
-# tabs.fg.selected.odd (QtColor):
-#     Foreground color of selected odd tabs.
-#     Default: white
-#
-# tabs.bg.selected.odd (QtColor):
-#     Background color of selected odd tabs.
-#     Default: black
-#
-# tabs.fg.selected.even (QtColor):
-#     Foreground color of selected even tabs.
-#     Default: ${tabs.fg.selected.odd}
-#
-# tabs.bg.selected.even (QtColor):
-#     Background color of selected even tabs.
-#     Default: ${tabs.bg.selected.odd}
-#
-# tabs.bg.bar (QtColor):
-#     Background color of the tab bar.
-#     Default: #555555
-#
-# tabs.indicator.start (QtColor):
-#     Color gradient start for the tab indicator.
-#     Default: #0000aa
-#
-# tabs.indicator.stop (QtColor):
-#     Color gradient end for the tab indicator.
-#     Default: #00aa00
-#
-# tabs.indicator.error (QtColor):
-#     Color for the tab indicator on errors..
-#     Default: #ff0000
-#
-# tabs.indicator.system (ColorSystem):
-#     Color gradient interpolation system for the tab indicator.
-#         rgb: Interpolate in the RGB color system.
-#         hsv: Interpolate in the HSV color system.
-#         hsl: Interpolate in the HSL color system.
-#         none: Don't show a gradient.
-#     Default: rgb
-#
-# hints.fg (CssColor):
-#     Font color for hints.
-#     Default: black
-#
-# hints.bg (CssColor):
-#     Background color for hints.
-#     Default: -webkit-gradient(linear, left top, left bottom,
-#     color-stop(0%,#FFF785), color-stop(100%,#FFC542))
-#
-# hints.fg.match (CssColor):
-#     Font color for the matched part of hints.
-#     Default: green
-#
-# downloads.bg.bar (QssColor):
-#     Background color for the download bar.
-#     Default: black
-#
-# downloads.fg.start (QtColor):
-#     Color gradient start for download text.
-#     Default: white
-#
-# downloads.bg.start (QtColor):
-#     Color gradient start for download backgrounds.
-#     Default: #0000aa
-#
-# downloads.fg.stop (QtColor):
-#     Color gradient end for download text.
-#     Default: ${downloads.fg.start}
-#
-# downloads.bg.stop (QtColor):
-#     Color gradient stop for download backgrounds.
-#     Default: #00aa00
-#
-# downloads.fg.system (ColorSystem):
-#     Color gradient interpolation system for download text.
-#         rgb: Interpolate in the RGB color system.
-#         hsv: Interpolate in the HSV color system.
-#         hsl: Interpolate in the HSL color system.
-#         none: Don't show a gradient.
-#     Default: rgb
-#
-# downloads.bg.system (ColorSystem):
-#     Color gradient interpolation system for download backgrounds.
-#         rgb: Interpolate in the RGB color system.
-#         hsv: Interpolate in the HSV color system.
-#         hsl: Interpolate in the HSL color system.
-#         none: Don't show a gradient.
-#     Default: rgb
-#
-# downloads.fg.error (QtColor):
-#     Foreground color for downloads with errors.
-#     Default: white
-#
-# downloads.bg.error (QtColor):
-#     Background color for downloads with errors.
-#     Default: red
-#
-# webpage.bg (QtColor):
-#     Background color for webpages if unset (or empty to use the
-#     theme's color)
-#     Default: white
-completion.fg = white
-completion.bg = #333333
-completion.alternate-bg = #444444
-completion.category.fg = white
-completion.category.bg = qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 #888888, stop:1 #505050)
-completion.category.border.top = black
-completion.category.border.bottom = ${completion.category.border.top}
-completion.item.selected.fg = black
-completion.item.selected.bg = #e8c000
-completion.item.selected.border.top = #bbbb00
-completion.item.selected.border.bottom = ${completion.item.selected.border.top}
-completion.match.fg = #ff4444
-completion.scrollbar.fg = ${completion.fg}
-completion.scrollbar.bg = ${completion.bg}
-statusbar.fg = white
-statusbar.bg = black
-statusbar.fg.error = ${statusbar.fg}
-statusbar.bg.error = red
-statusbar.fg.warning = ${statusbar.fg}
-statusbar.bg.warning = darkorange
-statusbar.fg.prompt = ${statusbar.fg}
-statusbar.bg.prompt = darkblue
-statusbar.fg.insert = ${statusbar.fg}
-statusbar.bg.insert = darkgreen
-statusbar.fg.command = ${statusbar.fg}
-statusbar.bg.command = ${statusbar.bg}
-statusbar.fg.caret = ${statusbar.fg}
-statusbar.bg.caret = purple
-statusbar.fg.caret-selection = ${statusbar.fg}
-statusbar.bg.caret-selection = #a12dff
-statusbar.progress.bg = white
-statusbar.url.fg = ${statusbar.fg}
-statusbar.url.fg.success = white
-statusbar.url.fg.success.https = lime
-statusbar.url.fg.error = orange
-statusbar.url.fg.warn = yellow
-statusbar.url.fg.hover = aqua
-tabs.fg.odd = white
-tabs.bg.odd = grey
-tabs.fg.even = white
-tabs.bg.even = darkgrey
-tabs.fg.selected.odd = white
-tabs.bg.selected.odd = black
-tabs.fg.selected.even = ${tabs.fg.selected.odd}
-tabs.bg.selected.even = ${tabs.bg.selected.odd}
-tabs.bg.bar = #555555
-tabs.indicator.start = #0000aa
-tabs.indicator.stop = #00aa00
-tabs.indicator.error = #ff0000
-tabs.indicator.system = rgb
-hints.fg = black
-hints.bg = -webkit-gradient(linear, left top, left bottom, color-stop(0%,#FFF785), color-stop(100%,#FFC542))
-hints.fg.match = green
-downloads.bg.bar = black
-downloads.fg.start = white
-downloads.bg.start = #0000aa
-downloads.fg.stop = ${downloads.fg.start}
-downloads.bg.stop = #00aa00
-downloads.fg.system = rgb
-downloads.bg.system = rgb
-downloads.fg.error = white
-downloads.bg.error = red
-webpage.bg = white
-
-[fonts]
-# Fonts used for the UI, with optional style/weight/size.
-#  * Style: `normal`/`italic`/`oblique`
-#  * Weight: `normal`, `bold`, `100`..`900`
-#  * Size: _number_ `px`/`pt`
-#
-# _monospace (Font):
-#     Default monospace fonts.
-#     Default: Terminus, Monospace, "DejaVu Sans Mono", Monaco,
-#     "Bitstream Vera Sans Mono", "Andale Mono", "Liberation Mono",
-#     "Courier New", Courier, monospace, Fixed, Consolas, Terminal
-#
-# completion (Font):
-#     Font used in the completion widget.
-#     Default: 8pt ${_monospace}
-#
-# tabbar (QtFont):
-#     Font used in the tab bar.
-#     Default: 8pt ${_monospace}
-#
-# statusbar (Font):
-#     Font used in the statusbar.
-#     Default: 8pt ${_monospace}
-#
-# downloads (Font):
-#     Font used for the downloadbar.
-#     Default: 8pt ${_monospace}
-#
-# hints (Font):
-#     Font used for the hints.
-#     Default: bold 13px Monospace
-#
-# debug-console (QtFont):
-#     Font used for the debugging console.
-#     Default: 8pt ${_monospace}
-#
-# web-family-standard (FontFamily):
-#     Font family for standard fonts.
-#     Default:
-#
-# web-family-fixed (FontFamily):
-#     Font family for fixed fonts.
-#     Default:
-#
-# web-family-serif (FontFamily):
-#     Font family for serif fonts.
-#     Default:
-#
-# web-family-sans-serif (FontFamily):
-#     Font family for sans-serif fonts.
-#     Default:
-#
-# web-family-cursive (FontFamily):
-#     Font family for cursive fonts.
-#     Default:
-#
-# web-family-fantasy (FontFamily):
-#     Font family for fantasy fonts.
-#     Default:
-#
-# web-size-minimum (Int):
-#     The hard minimum font size.
-#     Default:
-#
-# web-size-minimum-logical (Int):
-#     The minimum logical font size that is applied when zooming out.
-#     Default:
-#
-# web-size-default (Int):
-#     The default font size for regular text.
-#     Default:
-#
-# web-size-default-fixed (Int):
-#     The default font size for fixed-pitch text.
-#     Default:
-_monospace = Terminus, Monospace, "DejaVu Sans Mono", Monaco, "Bitstream Vera Sans Mono", "Andale Mono", "Liberation Mono", "Courier New", Courier, monospace, Fixed, Consolas, Terminal
-completion = 8pt ${_monospace}
-tabbar = 8pt ${_monospace}
-statusbar = 8pt ${_monospace}
-downloads = 8pt ${_monospace}
-hints = bold 13px Monospace
-debug-console = 8pt ${_monospace}
-web-family-standard = 
-web-family-fixed = 
-web-family-serif = 
-web-family-sans-serif = 
-web-family-cursive = 
-web-family-fantasy = 
-web-size-minimum = 
-web-size-minimum-logical = 
-web-size-default = 
-web-size-default-fixed = 
diff --git a/.qutebrowser/userscripts/bookmarks-dmenu b/.qutebrowser/userscripts/bookmarks-dmenu
deleted file mode 100755
index 0f89413..0000000
--- a/.qutebrowser/userscripts/bookmarks-dmenu
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-
-url=$(cat ~/.config/qutebrowser/bookmarks/urls | dmenu -i -l 15 | awk '{print $1}')
-
-[ -z ${url} ] && exit
-
-echo "open $url" >> "$QUTE_FIFO"
diff --git a/.qutebrowser/userscripts/quickmarks-dmenu b/.qutebrowser/userscripts/quickmarks-dmenu
deleted file mode 100755
index 354b398..0000000
--- a/.qutebrowser/userscripts/quickmarks-dmenu
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-
-url=$(cat ~/.config/qutebrowser/quickmarks | dmenu -i -l 15 | awk '{print $NF}')
-
-[ -z ${url} ] && exit
-
-echo "open $url" >> "$QUTE_FIFO"
diff --git a/.qutebrowser/userscripts/url-from-surfraw b/.qutebrowser/userscripts/url-from-surfraw
deleted file mode 100755
index 9bd6795..0000000
--- a/.qutebrowser/userscripts/url-from-surfraw
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/usr/bin/env bash
-
-DEFAULT_SEARCH=startpage
-
-if [[ $1 =~ ^-.$ ]]; then
-    option="$1"
-    shift 1
-fi
-
-is_elvi=$(surfraw -elvi | grep -c "^$1\s")
-nbr_words=$(echo $1 | wc -w)
-
-if [[ $is_elvi -eq 0 && $nbr_words -eq 1 && ($1 == *.* || $1 == *:*) ]]; then
-    url="$1"
-else 
-    [[ $is_elvi -eq 0 ]] && sr="$DEFAULT_SEARCH $*" || sr=$*
-    url=$(surfraw -print $sr)
-fi
-
-echo "open $option $url" >> $QUTE_FIFO